All these parts in the picture are included in the $3,500 price.  The KR2S is located in Laguna Beach, CA.  You can reach me at 949-200-7038 or jsmonday@aol.com. 

Boat is extended and firewall to tail is 13'4" interior width is 40-1/2" inside dimension.  Center spar is 94" wide and spars are 101" long.  The Spars are beefed up and are slightly taller than stock.  Set up for the new AS series airfoil.

There is the KR2S Rand Conopy with protective coating on it .. it is tinted

.

The boat was made by someone else but it is extremely well constructed and extremely strong and waterproof.  The inside material is balsa core mahogany strips.  There are calculations not done by me that the boat can handle up to 160 hp engine.

It comes with KR2S Rand Prepreg parts Gas Tank, nose cover, canopy shroud and turtle deck, Also visible wing templates, Dual control Sticks Langford Style, 2 Honda seats, a crate of salvaged parts (in front of the plane)

Here is a picture of the back portion of the plane,  The rudder is built and is behind the unfinished vertical stabilizer,  elevator laying ontop of the horizontal stabilizer with Dr. Dean HInges on elevator.  Also you can see the main spars and the aft spars all done already.

Here is a pile of parts that goes with it.  Custom made dual pedals with master cylinders on all pedals.  Diehl front nose wheel assembly and old set of dual pedals, Allen electric trim kit.  Tracy Obrien brakes, axles, tires and brake line and fittings.  Another shot of the spars

Deihl main struts and castings, All the stock WAFS black pile of steel pieces.  WAF bolts

Here is a shot from the rear.  extra trim tap with cable laying on top and little faring that was salvaged.

Here is what the inside looks like.  An unbelievably strong boat that is waterproof!