From: To: Subject: KRnet Digest, Vol 66, Issue 1 Date: Saturday, June 14, 2003 12:02 PM Send KRnet mailing list submissions to krnet@mylist.net To subscribe or unsubscribe via the World Wide Web, visit http://mylist.net/listinfo/krnet or, via email, send a message with subject or body 'help' to krnet-request@mylist.net You can reach the person managing the list at krnet-owner@mylist.net When replying, please edit your Subject line so it is more specific than "Re: Contents of KRnet digest..." Today's Topics: 1. RE: Lighting up your KR (Ron Freiberger) 2. RE: Lighting up your KR (Dana Overall) 3. Re: Oshkosh 2003 4. Re: Lighting up your KR (David Mullins) 5. Re: Oshkosh 2003 6. Re: Lighting up your KR (Dana Overall) 7. Re: Lighting up your KR (Robert Stone) 8. Interesting Experience - Simulator (Dan Heath) ---------------------------------------------------------------------- Date: Fri, 13 Jun 2003 15:16:22 -0500 From: "Ron Freiberger" To: "KR builders and pilots" Subject: RE: KR>Lighting up your KR Message-ID: In-Reply-To: Content-Type: text/plain; charset="iso-8859-1" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Precedence: list Message: 1 OK Dana, while we've got your light goin', Can you cut it to a shorter piece? If not, and I wanted to loop it back, how small a bending radius? Thanks Ron Freiberger mailto: rfreiberger@swfla.rr.com Here you go gangs, interior lighting brought to you by the movie The Fast and Furious. This is a Electroluminance Stringlight from ------------------------------ Date: Fri, 13 Jun 2003 19:09:15 -0400 From: "Dana Overall" To: krnet@mylist.net Subject: RE: KR>Lighting up your KR Message-ID: Content-Type: text/plain; format=flowed MIME-Version: 1.0 Precedence: list Message: 2 No you cannot cut it but I just lite it up and ran a 180 around the tip of my little finger. I got a little braver and pinched it down to about 3/8" with not problem. I don't want to kink it so I didn't squeeze any tighter. Dana Overall 1999 & 2000 National KR Gathering host Richmond, KY RV-7 slider/fuselage http://rvflying.tripod.com do not archive >From: "Ron Freiberger" >Reply-To: rfreiberger@swfla.rr.com, KR builders and pilots > >To: "KR builders and pilots" >Subject: RE: KR>Lighting up your KR >Date: Fri, 13 Jun 2003 15:16:22 -0500 > >OK Dana, while we've got your light goin', Can you cut it to a shorter >piece? >If not, and I wanted to loop it back, how small a bending radius? >Thanks > >Ron Freiberger >mailto: rfreiberger@swfla.rr.com > > >Here you go gangs, interior lighting brought to you by the movie The Fast >and Furious. This is a Electroluminance Stringlight from > > >_______________________________________________ >see KRnet list details at http://www.krnet.org/instructions.html _________________________________________________________________ Help STOP SPAM with the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail ------------------------------ Date: Fri, 13 Jun 2003 22:01:43 EDT From: AviationMech@aol.com To: krnet@mylist.net Subject: Re: KR>Oshkosh 2003 Message-ID: Content-Type: text/plain; charset="US-ASCII" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Precedence: list Message: 3 In a message dated 6/11/2003 10:33:58 PM Eastern Daylight Time, jfaughn@mvp.net writes: > there will not be > a KR dinner. As long as KR folks are there, we should have a get together of some sort, be it a dinner or beer and dogs. Orma AKA AviationMech KR-2 N110LR 1984 to Present www.members.aol.com/aviationmech ------------------------------ Date: Fri, 13 Jun 2003 23:56:18 -0400 From: David Mullins To: KR builders and pilots Subject: Re: KR>Lighting up your KR Message-ID: <3EEA9CE2.52B13467@attbi.com> References: Content-Type: text/plain; charset=us-ascii MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Precedence: list Message: 4 Dana, You can Cut it but you need to seal the cut end with silicone or equivelent. The best place I found for this stuff is http://www.elwirecheap.com You can get it in different colors and thicknesses. I am using the blue/green tape instead of the wire version. See http://n323xl.iwarp.com/blinstpanel5.htm Dave Mullins Nashua, New Hampshire http://n323xl.iwarp.com Dana Overall wrote: > > No you cannot cut it but I just lite it up and ran a 180 around the tip of > my little finger. I got a little braver and pinched it down to about 3/8" > with not problem. I don't want to kink it so I didn't squeeze any tighter. > > Dana Overall > 1999 & 2000 National KR Gathering host > Richmond, KY > RV-7 slider/fuselage > http://rvflying.tripod.com > do not archive > > >From: "Ron Freiberger" > >Reply-To: rfreiberger@swfla.rr.com, KR builders and pilots > > > >To: "KR builders and pilots" > >Subject: RE: KR>Lighting up your KR > >Date: Fri, 13 Jun 2003 15:16:22 -0500 > > > >OK Dana, while we've got your light goin', Can you cut it to a shorter > >piece? > >If not, and I wanted to loop it back, how small a bending radius? > >Thanks > > > >Ron Freiberger > >mailto: rfreiberger@swfla.rr.com > > > > > >Here you go gangs, interior lighting brought to you by the movie The Fast > >and Furious. This is a Electroluminance Stringlight from > > > > > >_______________________________________________ > >see KRnet list details at http://www.krnet.org/instructions.html > > _________________________________________________________________ > Help STOP SPAM with the new MSN 8 and get 2 months FREE* > http://join.msn.com/?page=features/junkmail > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html ------------------------------ Date: Sat, 14 Jun 2003 00:16:37 EDT From: Glenda26@aol.com To: krnet@mylist.net Subject: Re: KR>Oshkosh 2003 Message-ID: <184.1c664e94.2c1bfba5@aol.com> Content-Type: text/plain; charset="US-ASCII" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Precedence: list Message: 5 I plan on being there. Count me in. Glenda McElwee ------------------------------ Date: Sat, 14 Jun 2003 06:30:10 -0400 From: "Dana Overall" To: krnet@mylist.net Subject: Re: KR>Lighting up your KR Message-ID: Content-Type: text/plain; format=flowed MIME-Version: 1.0 Precedence: list Message: 6 I was just going by what the el cheapo package said................"Do not cut". Dana Overall Richmond, KY RV-7 slider/fuselage http://rvflying.tripod.com do not archive >From: David Mullins >You can Cut it but you need to seal the cut end with silicone or >equivelent. >The best place I found for this stuff is http://www.elwirecheap.com You _________________________________________________________________ The new MSN 8: advanced junk mail protection and 2 months FREE* http://join.msn.com/?page=features/junkmail ------------------------------ Date: Sat, 14 Jun 2003 09:33:16 -0500 From: "Robert Stone" To: "KR builders and pilots" Subject: Re: KR>Lighting up your KR Message-ID: <000401c33281$e577a7a0$ba21f218@hot.rr.com> References: Content-Type: text/plain; charset="windows-1257" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Precedence: list Message: 7 Dana, I just looked at your web site and think that it is excellent. If you keep up adding to it as you go along you will have produced a very valuable builders manual that covers a lot of detail left out of the original. Bob Stone, Harker Heights, TX rstone4@hot.rr.com ----- Original Message ----- From: "Dana Overall" To: Sent: Saturday, June 14, 2003 5:30 AM Subject: Re: KR>Lighting up your KR > I was just going by what the el cheapo package said................"Do not > cut". > > > > Dana Overall > Richmond, KY > RV-7 slider/fuselage > http://rvflying.tripod.com > do not archive > > > > > > >From: David Mullins > >You can Cut it but you need to seal the cut end with silicone or > >equivelent. > >The best place I found for this stuff is http://www.elwirecheap.com You > > _________________________________________________________________ > The new MSN 8: advanced junk mail protection and 2 months FREE* > http://join.msn.com/?page=features/junkmail > > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html > ------------------------------ Date: Sat, 14 Jun 2003 08:33:44 -0400 (Eastern Standard Time) From: "Dan Heath" To: "krnet@mylist.net" Subject: KR>Interesting Experience - Simulator Message-ID: <3EEB1628.000007.03628@Computer> Content-Type: Text/Plain; charset="iso-8859-1" MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Precedence: list Message: 8 I just flew the 172 Skyhawk in X-Plane. I actually took off and landed, = but when I was done, I was shaking all over and my heart was pounding. It reminded me of the time Jerry and I were lost on the way back from our fi= rst KR Gathering and we landed at an unknown airport in a heavy haze. =0D =0D I even had to apply carb heat at one point as the engine was icing up. I= t is more difficult to fly the sim than it is to fly the real thing. Now I need a KR2 for the X-Plane. =0D =0D N64KR=0D =0D Daniel R. Heath - Columbia, SC=0D =0D DanRH@KR-Builder.org=0D =0D See you in Red Oak - 2003=0D =0D See our KR at http://KR-Builder.org - Click on the pic=0D See our EAA Chapter 242 at http://EAA242.org=0D =20From rjk1964@bellsouth.net Sat Jun 14 08:12:54 2003 Received: from mail102.mail.bellsouth.net ([205.152.58.42] helo=imf21aec.bellsouth.net) by lizard.esosoft.net with esmtp (Exim 3.36 #1)id 19RCi6-0000ip-00 for krnet@mylist.net; Sat, 14 Jun 2003 08:12:54 -0700 Received: from rklucznik ([65.80.215.182]) by imf21aec.bellsouth.net (InterMail vM.5.01.05.27 201-253-122-126-127-20021220) with SMTP id <20030614151119.FXAI2670.imf21aec.bellsouth.net@rklucznik> for ; Sat, 14 Jun 2003 11:11:19 -0400 Message-ID: <001201c33286$716d97c0$0201a8c0@rklucznik> From: "RJK" To: "KR builders and pilots" References: <3EEB1628.000007.03628@Computer> Subject: Re: KR>Interesting Experience - Simulator Date: Sat, 14 Jun 2003 11:05:50 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1106 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 X-BeenThere: krnet@mylist.net X-Mailman-Version: 2.1b3 Precedence: list Reply-To: RJK , KR builders and pilots List-Id: KR builders and pilots List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: List-Help: LOST? No, never lost. Temporarily disoriented but never lost! ;) Rick Klucznik ----- Original Message ----- From: "Dan Heath" To: Sent: Saturday, June 14, 2003 8:33 AM Subject: KR>Interesting Experience - Simulator I just flew the 172 Skyhawk in X-Plane. I actually took off and landed, but when I was done, I was shaking all over and my heart was pounding. It reminded me of the time Jerry and I were lost on the way back from our first KR Gathering and we landed at an unknown airport in a heavy haze. I even had to apply carb heat at one point as the engine was icing up. It is more difficult to fly the sim than it is to fly the real thing. Now I need a KR2 for the X-Plane. N64KR Daniel R. Heath - Columbia, SC DanRH@KR-Builder.org See you in Red Oak - 2003 See our KR at http://KR-Builder.org - Click on the pic See our EAA Chapter 242 at http://EAA242.org _______________________________________________ see KRnet list details at http://www.krnet.org/instructions.html ------------------------------ _______________________________________________ See KRnet list details at http://www.krnet.org/instructions.html End of KRnet Digest, Vol 66, Issue 1 ************************************