From: To: Subject: KRnet Digest, Vol 93, Issue 2 Date: Friday, July 11, 2003 12:05 PM Send KRnet mailing list submissions to krnet@mylist.net To subscribe or unsubscribe via the World Wide Web, visit http://mylist.net/listinfo/krnet or, via email, send a message with subject or body 'help' to krnet-request@mylist.net You can reach the person managing the list at krnet-owner@mylist.net When replying, please edit your Subject line so it is more specific than "Re: Contents of KRnet digest..." Today's Topics: 1. Re: My KR2S (Justin) 2. Re: KR LIST (Robert Stone) 3. RE: KR LIST (David McKelvey4764) 4. Re: My KR2S (James R Freeman) 5. Re: Fun Friday.....Don't look Ethal!! (James R Freeman) 6. Re: Fun Friday.....Don't look Ethal!! (James R Freeman) 7. Re: Kr builder list (larry severson) ---------------------------------------------------------------------- Date: Fri, 11 Jul 2003 09:41:52 -0500 From: "Justin" To: "KR builders and pilots" Subject: Re: KR>My KR2S Message-ID: <002901c347ba$91bc9410$61d91818@computer> References: <000e01c3476f$bf0c1d50$61d91818@computer> <001d01c3476f$d0e69460$61d91818@computer> <001101c3479e$392a8a80$6401a8c0@wi.rr.com> Content-Type: text/plain; charset="iso-8859-1" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Precedence: list Message: 1 As you might not know is that im not using typical plywood skins. I will be using fiberglass skins in a sandwhich form meaning im putting foam inbetween the wood. I will varnish the entire airplane but only one coat on the outsides that is sanded. Remember the fiberglass will bond to the foam extremly well and the wood but say my wood isnt correct in some place, I will fill the gap using flox which is stronger than the wood. Sound like it would work to you guys? Justin ----- Original Message ----- From: "Mark Jones" To: "KR builders and pilots" Sent: Friday, July 11, 2003 6:18 AM Subject: Re: KR>My KR2S > Justin. > In the photo of your boat you state you are varnishing the wood. Do not > varnish it until you have skinned it, and completed the plywood gussets > around the main spar, added your rear bulkhead, etc. If you do, you will not > get a good bond between the frame and skins. You are going to have to do a > lot of sanding to get back to bare wood to skin the frame. > > Mark Jones (N886MJ) > Wales, WI USA > E-mail me at flykr2s@wi.rr.com > Visit my KR-2S CorvAIRCRAFT web site at > http://mywebpage.netscape.com/n886mj/homepage.html > > > ----- Original Message ----- > From: "Justin" > To: "KR builders and pilots" > Sent: Friday, July 11, 2003 12:46 AM > Subject: Re: KR>My KR2S > > > > http://www.geocities.com/attngrabber14/kr2s.html > > > > Forgot the link > > ----- Original Message ----- > > From: "Justin" > > To: > > Sent: Friday, July 11, 2003 12:46 AM > > Subject: KR>My KR2S > > > > > > Here is a link to my website. I just bought a digital camera and took a > few > > pictures of my project with it. I had a bad experience with a normal > camera, > > the film place LOST my film which included all of my construction photo's > on > > it so this digital camera will prevent that. > > > > Justin > > _______________________________________________ > > see KRnet list details at http://www.krnet.org/instructions.html > > > > > > > > _______________________________________________ > > see KRnet list details at http://www.krnet.org/instructions.html > > > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html > ------------------------------ Date: Fri, 11 Jul 2003 09:58:50 -0500 From: "Robert Stone" To: "KR builders and pilots" Subject: Re: KR>KR LIST Message-ID: <002501c347bc$f04fef20$ba21f218@hot.rr.com> References: <1cd.d84ee7a.2c402697@aol.com> Content-Type: text/plain; charset="iso-8859-1" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Precedence: list Message: 2 Behold the phantom KR Builder, Maybe the guy is a ghost. Bob Stone, Harker Heights, TX rstone4@hot.rr.com ----- Original Message ----- From: To: Sent: Friday, July 11, 2003 9:41 AM Subject: KR>KR LIST > please email me your info, i.e. name, > location, type project, and of course you email address to; > Kr2sN506KR@aol.com > > More than once Kr2sN506KR@aol.com Has asked for this information without > identifying himself . > > N506KR is not a registered "N" number. > Kr2sN506KR@aol.com is not listed in the AOL Member directory. > Kr2sN506KR@aol.com AOL Member Profile is also blank. > > Lynn Hyder N37LH > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html > ------------------------------ Date: Fri, 11 Jul 2003 10:15:21 -0500 From: "David McKelvey4764" To: "KR builders and pilots" Subject: RE: KR>KR LIST Message-ID: In-Reply-To: <002501c347bc$f04fef20$ba21f218@hot.rr.com> Content-Type: text/plain; charset="iso-8859-1" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Precedence: list Message: 3 http://hometown.aol.com/kr2sn506kr/myhomepage/profile.html Here's the link to his list, it is a cool idea if everyone sent their info. I found out I was in his home town a few months ago, had I known before, I would have snuck away to talk KR's a while. But you do need a signature file so poeple know who you are Chris. Dave McKelvey, Grapevine, TX davmck@witty.com -----Original Message----- From: krnet-bounces@mylist.net [mailto:krnet-bounces@mylist.net]On Behalf Of Robert Stone Sent: Friday, July 11, 2003 9:59 AM To: KR builders and pilots Subject: Re: KR>KR LIST Behold the phantom KR Builder, Maybe the guy is a ghost. Bob Stone, Harker Heights, TX rstone4@hot.rr.com ----- Original Message ----- From: To: Sent: Friday, July 11, 2003 9:41 AM Subject: KR>KR LIST > please email me your info, i.e. name, > location, type project, and of course you email address to; > Kr2sN506KR@aol.com > > More than once Kr2sN506KR@aol.com Has asked for this information without > identifying himself . > > N506KR is not a registered "N" number. > Kr2sN506KR@aol.com is not listed in the AOL Member directory. > Kr2sN506KR@aol.com AOL Member Profile is also blank. > > Lynn Hyder N37LH > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html > _______________________________________________ see KRnet list details at http://www.krnet.org/instructions.html ------------------------------ Date: Fri, 11 Jul 2003 12:14:19 -0400 From: James R Freeman To: KR builders and pilots Subject: Re: KR>My KR2S Message-ID: <01aa01c347c7$7c9f6230$d1b774cc@HPlaptop> References: <000e01c3476f$bf0c1d50$61d91818@computer> <001d01c3476f$d0e69460$61d91818@computer> <001101c3479e$392a8a80$6401a8c0@wi.rr.com> <002901c347ba$91bc9410$61d91818@computer> Content-Type: text/plain; charset=iso-8859-1 MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Precedence: list Message: 4 Look at how the Cozy IV is made, wood is almost nill. ----- Original Message ----- From: "Justin" To: "KR builders and pilots" Sent: Friday, July 11, 2003 10:41 AM Subject: Re: KR>My KR2S > As you might not know is that im not using typical plywood skins. I will be > using fiberglass skins in a sandwhich form meaning im putting foam inbetween > the wood. I will varnish the entire airplane but only one coat on the > outsides that is sanded. Remember the fiberglass will bond to the foam > extremly well and the wood but say my wood isnt correct in some place, I > will fill the gap using flox which is stronger than the wood. > > Sound like it would work to you guys? > > Justin > ----- Original Message ----- > From: "Mark Jones" > To: "KR builders and pilots" > Sent: Friday, July 11, 2003 6:18 AM > Subject: Re: KR>My KR2S > > > > Justin. > > In the photo of your boat you state you are varnishing the wood. Do not > > varnish it until you have skinned it, and completed the plywood gussets > > around the main spar, added your rear bulkhead, etc. If you do, you will > not > > get a good bond between the frame and skins. You are going to have to do a > > lot of sanding to get back to bare wood to skin the frame. > > > > Mark Jones (N886MJ) > > Wales, WI USA > > E-mail me at flykr2s@wi.rr.com > > Visit my KR-2S CorvAIRCRAFT web site at > > http://mywebpage.netscape.com/n886mj/homepage.html > > > > > > ----- Original Message ----- > > From: "Justin" > > To: "KR builders and pilots" > > Sent: Friday, July 11, 2003 12:46 AM > > Subject: Re: KR>My KR2S > > > > > > > http://www.geocities.com/attngrabber14/kr2s.html > > > > > > Forgot the link > > > ----- Original Message ----- > > > From: "Justin" > > > To: > > > Sent: Friday, July 11, 2003 12:46 AM > > > Subject: KR>My KR2S > > > > > > > > > Here is a link to my website. I just bought a digital camera and took a > > few > > > pictures of my project with it. I had a bad experience with a normal > > camera, > > > the film place LOST my film which included all of my construction > photo's > > on > > > it so this digital camera will prevent that. > > > > > > Justin > > > _______________________________________________ > > > see KRnet list details at http://www.krnet.org/instructions.html > > > > > > > > > > > > _______________________________________________ > > > see KRnet list details at http://www.krnet.org/instructions.html > > > > > > > > _______________________________________________ > > see KRnet list details at http://www.krnet.org/instructions.html > > > > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html > ------------------------------ Date: Fri, 11 Jul 2003 12:36:29 -0400 From: James R Freeman To: KR builders and pilots Subject: Re: KR>Fun Friday.....Don't look Ethal!! Message-ID: <01e401c347ca$bd1239c0$d1b774cc@HPlaptop> References: Content-Type: text/plain; charset=iso-8859-1 MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Precedence: list Message: 5 Dana: If I did not tell You the other night I am a ex NASA space flight director / test piliot. One time I had to take a V.I.P. (Senator) from Goddard SFC to Penn. to see how the IR mapping of the great under-ground coal fire was going. I had a heck of a time out of the MU-2B used all most the whole strip with STOL wing mod. by NASA Ames.???? Looked an VIP had his feet full on the brakes to brace him self. So I agree 100%. Jim ----- Original Message ----- From: "Dana Overall" To: Sent: Friday, July 11, 2003 8:05 AM Subject: Re: KR>Fun Friday.....Don't look Ethal!! > BTW, I am not installing brakes on the passenger side I don't want the > passenger, when I jockey it all over the runway with the tailwheel, to > decide to take matters in his/her own hands and slam on the brakes;) > Tipping it up is for me, and only me, to do!! > > > > Dana Overall > 1999 & 2000 National KR Gathering host > Richmond, KY > RV-7 slider/fuselage > Finish kit ordered!! Buying Instruments > http://rvflying.tripod.com > do not archive > > _________________________________________________________________ > Add photos to your e-mail with MSN 8. Get 2 months FREE*. > http://join.msn.com/?page=features/featuredemail > > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html > ------------------------------ Date: Fri, 11 Jul 2003 12:40:02 -0400 From: James R Freeman To: James R Freeman , KR builders and pilots Subject: Re: KR>Fun Friday.....Don't look Ethal!! Message-ID: <01ea01c347cb$14150180$d1b774cc@HPlaptop> Content-Type: text/plain; charset=iso-8859-1 MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Precedence: list Message: 6 ----- Original Message ----- From: "James R. Freeman" To: "KR builders and pilots" Sent: Friday, July 11, 2003 12:36 PM Subject: Re: KR>Fun Friday.....Don't look Ethal!! > Dana: > If I did not tell You the other night I am a ex NASA space flight > director / test piliot. One time I had to take a V.I.P. (Senator) from > Goddard SFC to Penn. to see how the IR mapping of the great under-ground > coal fire was going. I had a heck of a time out of the MU-2B used all most > the whole strip with STOL wing mod. by NASA Ames.???? Looked an VIP had his > feet full on the brakes to brace him self. So I agree 100%. > Jim > ----- Original Message ----- > From: "Dana Overall" > To: > Sent: Friday, July 11, 2003 8:05 AM > Subject: Re: KR>Fun Friday.....Don't look Ethal!! > > > > BTW, I am not installing brakes on the passenger side I don't want the > > passenger, when I jockey it all over the runway with the tailwheel, to > > decide to take matters in his/her own hands and slam on the brakes;) > > Tipping it up is for me, and only me, to do!! > > > > > > > > Dana Overall > > 1999 & 2000 National KR Gathering host > > Richmond, KY > > RV-7 slider/fuselage > > Finish kit ordered!! Buying Instruments > > http://rvflying.tripod.com > > do not archive > > > > _________________________________________________________________ > > Add photos to your e-mail with MSN 8. Get 2 months FREE*. > > http://join.msn.com/?page=features/featuredemail > > > > > > _______________________________________________ > > see KRnet list details at http://www.krnet.org/instructions.html > > > ------------------------------ Date: Fri, 11 Jul 2003 11:31:15 -0700 From: larry severson To: KR builders and pilots Subject: Re: KR>Kr builder list Message-ID: <5.2.1.1.0.20030711112939.00b6fd50@pop-server.socal.rr.com> In-Reply-To: <9.1524e791.2c3fa6c9@aol.com> Content-Type: text/plain; charset="us-ascii"; format=flowed MIME-Version: 1.0 Precedence: list Message: 7 I do not want my e-mail address posted on any web site. I already get objectionable spam! I do not want more! So I was thinking about putting together a list with names, location, type >project, and email address on my web site so that other builders can find >each >other easily. Larry Severson Fountain Valley, CA 92708 (714) 968-9852 larry2@socal.rr.com ------------------------------ _______________________________________________ See KRnet list details at http://www.krnet.org/instructions.html End of KRnet Digest, Vol 93, Issue 2 ************************************